Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Before installing MettleCI Command Line Interface you will need to perform a pre-installation Java update to make sure you Java environment is compatible with MettleCI.

These instructions assume you have already sourced a MettleCI license file during the Workbench installation process. Note that the installation of MettleCI Workbench is not a prerequisite to installing the MettleCI Command Line Interface.

Installation

  1. Download the latest MettleCI CLI RPM distributable from the MettleCI software download website.

  2. Open a shell and navigate to the ,location of your . Install the mettleCI CLI using Red Hat Package Manager (RPM)

    $> sudo rpm -U dm-mettleci-command-shell-x.x-x.noarch.rpm
$> # or for IBM AIX...
$> sudo rpm -U dm-mettleci-command-shell-x.x-x.noarch.rpm --nodeps --ignoreos

    … where x.x.x is the build version of the workbench you downloaded.

  3. If you are installing the MettleCI CLI alongside the MettleCI Workstation on a DataStage engine tier, you will already have a MettleCI license file which the Command Shell will use without need for configuration.

  4. If you don’t already have a MettleCI license file:

    1. Request a trial license for MettleCI from the link on the same site. This will be delivered to you via email as a file attachment.

    2. By default, the config.properties configuration file refers to the license file location by license.file=../mettleci.lic (the parent directory). Save the license file and update the license.file setting to refer to its location.

Verify your install/upgrade

  1. Verify your MettleCi is running:

    $> mettleci
MettleCI Command Line. Build xxx
(C)2018-2020 Data Migrators Pty Ltd
mettleci>

Uninstall the Command Line Interface

  1. You can uninstall the MettleCI Workbench package like any other RPM package:

    $> sudo rpm -e dm-mettleci-command-shell

Downgrading Command Line Interface

  1. If something goes wrong and you need to downgrade your version of MettleCI Command Line Interface, without performing an uninstall/reinstall, you can use the following command:

    $> rpm -Uvh --oldpackage dm-mettleci-command-shell-x.x-x.noarch.rpm

    … where x.x.x is the build version of the CLI you want to downgrade to.

  • No labels

© 2015-2024 Data Migrators Pty Ltd.